Spray at an angle so to spray both the edge and the front of each panel of the fence at the same
time
Start from the top and work your way down
Move the gun slowly downwards in the straight line keeping it parallel to the edge of the
panel
Spraying a Metal Gate
Put a sheet of cardboard behind the gate you intend spraying.
Spray at an angle so to spray as much of each bar, and one bar only
Start from the top and work your way down
Move the gun slowly downwards in a straight line keeping it parallel to the bar of the
gate
Rectangular Panel
Use the spray gun at an angle so to spray the whole of the edge and some of the top
panel
Start from one corner and follow the arrows along the perimeter of the
panel
Horizontal Surface
Start from one corner of the panel and follow the edge remaining parallel to that edge moving the spray gun slowly from left to right, and then right to left
alternatively
Always move the spray gun in straight lines and remain at the same angle and distance from the
surface
Use the spray gun at an angle pointing so that any spray mist lands over the unpainted
area
Large Panels
Repeat the procedure described for a horizontal panel, spraying a rectangular area at a time, and overlapping when applying the paint.
