| DIY | Workshop
The choice of compressors is dependent on the use that one wants to make, the applications, and the equipment one wants to use. For home/DIY use you will be looking for a compressor that you can run from a standard 13 Amp plug, with a reasonable size receiver that produces enough air to run the tools and equipment that you plan using.
Is your compressor powerful enough for the tools you would like to use?
Many of our customers buy a starter pack, for a number of different reasons. As they start appreciating how many different applications are available using compressed air, they may find themselves in the situation where the compressor is not suitable to run some of the larger tools available in our range.
At ABAC UK we want to make your experience of using compressed air as enjoyable as possible, by letting you buy with the confidence that, as you learn more about compressed air you can add to your equipment a little bit at a time.
Always consult our reference table on selecting a compressor before purchasing any tools.
Click here if you would like to take advantage of our refund service and upgrade to a larger compressor.
The power of the compressor: this will determine how much air the unit is able to produce, usually a 2, or 2.5 HP compressor will allow to use a good selection of tools.
The receiver: this acts as a buffer by storing the air produced by the compressor and making it available to the equipment being used, it also allows the compressor to run intermittently and therefore more efficiently. Usually a 24 Lt or 50 Lt receiver is a good size and makes the machine compact and therefore easier to store.
Portable or Stationary: Portable compressors are lighter in weight, have wheels and can easily be moved around.  Using the numerical key:
The number is made by 2 parts, the first digit represents the power of the compressor, the second the size of the receiver. When the smallest compressor is recommended, you can select any other compressor where both digits are higher. eg. if 23 is shown, 33 is OK, but 32 is not as the receiver is too small.
Click here if you would like to know how a compressor works, or would like more information on starting, using and maintaining your compressor.
DIY Compressors
Below is a table, for you to use as a cross reference between the tools and applications you want to use and the compressor you will need to perform these applications. You can view the technical specification for each tool or compressor by clicking its image.
The key below shows you which compressors can perform the applications that they are cross referenced with,
 | Not Suitable - means that the compressor is incapable of performing that application. |  | Intermittent - means that the compressor cannot supply enough air to the tool for it to run continuously, but, can be used intermittently. |  | Continuous - means that the compressor can supply enough air to the tool for it to run continuously, while the compressor is running.
Please note: All compressors shown below are designed for intermittent use. This means that they should stop and start about 6-8 times per hour to allow for the heat to dissipate, and must operate according to the instructions supplied. |
For the Workshop
 Professional Models
The following compressors are suitable for use in the workshop as well as for more simple DIY tasks. They are capable of supplying enough air to run any of the tools listed above in a continuous manner. Larger machines are available on request. enquiries@abac.co.uk
|
Compressors & Equipment 
